meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
ctpaintdisplacementx [2020/07/17 14:02] – created windsorctpaintdisplacementx [2023/04/03 17:57] (current) – steph.jorgensen
Line 5: Line 5:
 >**Note:** Displacement edits will remain regardless of changes to the model’s resolution.  >**Note:** Displacement edits will remain regardless of changes to the model’s resolution. 
  
-{{ ::hand_draw_1.jpg?nolink |}} +{{displacement_example_1.gif?nolink}}
-(need pretty displacement gif here) +
  
-==== How to Use Displacement ====+==== How to use displacement ====
  
 Follow these steps to get started with displacement. Follow these steps to get started with displacement.
Line 14: Line 13:
   * In Freehand Mode, select any Branch generator, then select Displacement in the Properties Window. The Displacement Brush will appear on your selection.    * In Freehand Mode, select any Branch generator, then select Displacement in the Properties Window. The Displacement Brush will appear on your selection. 
  
-{{ ::hand_draw_1.jpg?nolink |}} +{{displacement_brush_2.jpg?nolink&400}}
-(need displacement icon pic here) +
  
-{{ ::hand_draw_1.jpg?nolink |}} +  * Drag the outer ring to adjust brush size. 
-(need displacement brush pic here) +
  
-  * Drag the Small White Dot or center line to slide the Bend brush along the branch. +  * Drag the inner ring to adjust brush falloff. 
  
-  * Drag the Large Blue Dot to bend. Hold “Space” and drag the Large Blue Dot to lengthen the branch. +  * Drag the blue dot along the adjacent bar to adjust brush strength. 
  
-  * Drag the Small Blue Dot to resize the Bend brush. +  * Hold “Space” to perform the selected paint action described below.
  
-  * Drag the floating Blue Tab to twist the selected branch. +{{displacement_pull.gif?nolink}}
  
-  * Hold “CTRL” to make the Bend brush follow your pointer.+ ==== Displacement properties ====
  
- ==== Bend Properties ====+{{displacement_properties.jpg?nolink&400}}
  
-{{ ::hand_draw_1.jpg?nolink |}} +=== Brush size slider ===
-(need bend properties pic here) +
  
-=== Brush Size Slider ===+Controls the Displacement brush’s diameter/area of effect. 
  
-Controls the Bend brush’s length, from 0 to 1. +=== Brush falloff slider ===
  
-=== Brush Curvature Slider ===+Changes the falloff strength of the brush, resulting in sharper or softer curves. 
  
-Changes the strength of your bends. Higher values result in deeper bends, lower values will result in stiff, linear bends. +=== Brush strength slider ===
  
-=== Rotate Gizmo ===+Changes the displacement intensity. Higher values result in fast, sharp deformations. Lower values will result in slower, smoother deformations.
  
-{{ ::hand_draw_1.jpg?nolink |}} +=== Actions  ===
-(need rotate gizmo pic or gif here) +
  
-Checking Rotate Gizmo reveals a globe that allows you to quickly rotate and bend the spine. +Hold “Space” to perform an action. 
  
-=== Bend Counter  ===+== +/- == 
 +Left click = add, 
 +Right click = remove 
  
-Tracks your bend actions and allows you to undo/redo them in sequence. +== Set  == 
 +Spacebar + Left click = Brings area to the set value.
  
-=== Clear ===+== Smooth == 
 +Averages everything in the brush area; softens and blends contours.  
 + 
 +== Clear == 
 +Removes all edits. 
  
-Removes all your bend actions.